Mold is a problem that many homeowners have to deal with at some point. It can grow in damp places such as bathrooms, but it can also happen in other parts of your house. The good news is that mold isn’t always fatal, and there are ways to reduce the mold in your home if you find yourself with this problem. You can always contact a plumbing company in New York City to help you get rid of them.
Here are ways to get rid of mold in your bathroom.
You’ll need to don some protective gear to get the job done. Rubber gloves, a mask, and a HEPA filter vacuum are all essential parts of your mold-killing arsenal.
Once you have your gear ready, it’s time to start cleaning.
When using bleach or other products that contain chlorine, be sure not to inhale any fumes or get them in your eyes. Wear rubber gloves when pouring bleach down drains and disposing of empty containers so that you don’t accidentally expose yourself to harmful chemicals when handling them without proper protection.
If you’ve tried the natural remedy methods and they still aren’t working, it may be time to use a more chemical-based solution. Mold wipes are designed specifically for mold, making them less likely to cause allergic reactions than traditional cleaning products. They’re also effective at cleaning up more minor areas of mold—like those on bathroom fixtures or shower curtains.
You can also use a product like Clorox Disinfecting Wipes to wipe down hard surfaces in the bathroom, like countertops and sinks. Then, let them air dry for 15 minutes before using them again. Do this once or twice a week until all the molds have cleared up.
Many different mold-killing products are available at local hardware stores and online retailers. One important thing to remember is that not all molds are harmful to humans, so make sure you’re purchasing something that will kill off any mold you may have found on your floor or other places in the bathroom.
To spray your moldy shower curtain, fill a spray bottle with a bleach solution and shake it up. Then spray the shower curtain by squeezing the spray bottle’s trigger.
If you’re using one of those bottles with a delicate mist setting, this will help prevent over-saturating your shower curtain. You don’t want to soak it with too much bleach!
Replacing your shower curtain periodically is an easy way to keep mold from growing on it.
Shower curtains can get moldy when they’re not dried out properly after use or are exposed to condensation in humid conditions. They are inexpensive, easy to replace, and can be cleaned with a mild detergent or vinegar solution. If you have children or pets, consider getting antimicrobial shower curtains that will prevent the growth of mold and mildew on the fabric’s surface.
Once you’ve removed the mold and cleaned your home’s air, it’s time to get down to business with your bathroom grout. The best method depends on what type of grout you have in your bathroom. You’ll want to use a brush designed specifically for cleaning grout, or you can use an old toothbrush or another small scrubber.
If your grout is white, try using some bleach solution (1 part bleach and 10 parts water) or vinegar solution (1 part vinegar and 10 parts water). Be sure not to mix them; instead, apply both separately so that each solution has a chance to work its magic. If it weren’t already evident from their names, these solutions would make the mold disappear but leave some discoloration where it was once present—so keep this in mind as you clean!
Suppose your grouts are colored (reds especially). In that case, baking soda may work as an alternative cleaner since it won’t cause additional discoloration like bleach: apply some baking soda onto a wet sponge and scrub away!
Mix half a cup of bleach with one gallon of water in a spray bottle to clean bathroom fixtures of mold and mildew. Spray the affected area and let it sit for 10 minutes before scrubbing lightly with a sponge or cloth. Use a scrub brush to remove stubborn stains on your bathtub or shower walls if needed. Rinse all surfaces thoroughly with clean water after cleaning them (don’t forget to dry them off first!).
Avoid using harsh chemicals like Lysol because they could cause damage to the surface of your fixtures over time and make mold grow back faster than usual!
If you have moldy caulk, clean it with a bleach solution and replace it.
You can remove the old caulk using a plastic or metal scraper or a unique tool called a caulk gun. The latter is the easiest option for most people. You insert one end of the gun into your tub or shower and squeeze the handle to push out a new caulk from its chamber. If you’re doing this yourself, make sure both ends of your tub/shower are accessible before buying anything—you may need to rent some equipment from a hardware store first!
A musty smell is one of the first signs that you have a mold problem in your bathroom. This occurs when excess moisture in the air combines with bacteria which causes an odor. This can be caused by showering, using the sink or toilet, or even taking long baths in the tub. A musty smell can also be detected when you walk into your home after being gone for a while because it will linger until it dries out completely
Your bathroom should be dry at all times, and if there is moisture inside of the walls, then this may cause peeling paint as well as discoloration on walls and ceilings
If you have any discoloration on your walls or ceilings, you may have a mold problem in your home. It may appear as dark blotches or circles on your wall.
We are a full-service company that offers residential and commercial New York City plumbing services 24 hours a day, 7 days a week. Our technicians are well trained, certified, and insured so that you can trust us with any job, regardless of how big or small it may be. If you need plumbing repair or installation services in NYC, call us at +1(347)973-9186.